Cast steel globe valves flanged PN 40

Valvotubi ind bellow sealed globe valve
Article: 540
Flanges: UNI EN 1092-2 PN 40
Design: EN 1074
Face to face length: EN 558-1 serie 1
Installation: horizontal / vertical, with the flow following the direction of the arrow. When working pressure exceeds below indicated limits, valves must be installed in opposite direction, with pressure over the shutter, and balance disc type compulsory.
APPLICATIONS • Oil & refineries • Water • Steam • Industry

These cast steel on-off globe valves are provided with a stem packing which may require maintenance. For diameters higher than DN 100, we provide the globe valve with balance disc, to facilitate the opening; in this case the valve has to be mounted in the opposite direction, with pressure over the shutter. Handwheel operated. These globe valves can be applied for water, steam, not aggressive fluids, temperature and working pressure according to DIN 2401 part 2.

Materials
body  cast steel GS-C25, GP-240-GH
bonnet  cast steel GS-C25, GP-240-GH
handwheel  cast iron GG25, EN-GJL-250
stem  stainless steel X 20 CR 13
body and disc facing  stainless steel 304
disc  steel A182-F6
stem packing  graphite
bonnet gasket  graphite
painting nitro enamel
DN L mm. H mm. D mm. Weight kg.
 15  130  198  95  4
 20  150  198  105  5.5
 25  160  198  115  7
 32  180  273  140  9.5
 40  200  292  150  12
 50  230  295  165  17.5
 65  290  345  185  25
 80  310  395  200  33.5
 100  350  445  235  48
 125  400  500  270  71
 150  480  575  300  93.5
 200  600  680  375  173.5
 250  730  740  450  250
 300  850  780  515  320
 350  980  980  580  380
400 1100 1150  660  490
DN Nominal pressure Test pressure Mpa Max working pressure Mpa
mm BAR body seat 120°C 400°C
15 - 300 40 6,0 4,4 4,0 2,1
350 - 400 25 3,75 2,75 2,5 1,3
DN mm. 125-150 175-200 250-300 400
Atm. 30-21 18-14 9-6 3