Soft seated gate valves with socket ends PN 10 and 16

Valvotubi Ind. socket ends gate valve
Article: 96
Design: DIN 3352 Face to face length: ISO 5752 serie 15.
Installation: horizontal / vertical

APPLICATIONS • Water supply • Drinking water • Irrigation

Epoxy paiting suitable for drinking water applications.

Soft seated gate valves in ductile iron (GGG40 or GGG50) with EPDM lined wedge and socket ends are suitable to be installed on PVC plain end pipes for water supply systems. These valves are suitable for drinking water applications, being coated with epoxy powder painting, not toxic. This kind of gate valves are inside screw, with non rising stem in AISI 420, wegde EPDM vulcanized and sliding rails on the body, for a low friction movement. The soft seated gate valves are full bore, have no pressure drops, with the EPDM covered wedge that is not affected by corrosion and that doesn’t need any maintenance. In case of need, orings on the stem can be replaced with the valve in the pipeline and in complete open position. Soft seated gate valves in ductile iron can be installed above or under the ground level, or in chambers. Standard execution is by handwheel, on demand request of cap top, extension spindle, protective tube, T key and surface box for typical requirements in water supply and distribution systems.

Materials
body - bonnet  ductile iron GGG40/50, EN-GJS-400/500-15
wedge ductile iron GGG40/50, EN-GJS-400/500-15 EPDM covered
handwheel ductile iron GGG40/50, EN-GJS-400/500-15
stem stainless steel X20 CR13
stem seat o-ring
bonnet gasket  EPDM
painting  epoxy 250 mcr
DN L mm. L1 mm. PVC tube 0 mm. Weight kg.
50 250 77 63 10
65 270 80 75 13
80 280 84 90 16
100 300 88 110 19
125 325 91 125 27
125 325 91 140 27
150 350 94 160 35
200 400 100 200 56
200 400 100 225 56
250 450 125 250 81
300 500 140 315 115
DN Nominal pressure Test pressure MPa Max working pressure MPa
mm BAR body seat 80°C
50-300 16 2,4 1,76 1,6